PSI to kPa Converter

Convert pounds per square inch to kilopascals and back — the tyre-pressure conversion drivers meet on every door sticker and gauge.

Convert psi ⇄ kPa

220.6323 kPa
32 psi = 220.6323 kPa

Formula: 32 psi (psi × 6.89476) = 220.6323 kPa

How the psi to kpa conversion works

One psi is 6.89476 kilopascals, so the conversion is a single multiplication: kPa = psi × 6.89476. Going the other way, psi = kPa ÷ 6.89476. The factor is exact to five decimal places — a psi is defined from the pound-force and the inch, and a pascal is one newton per square metre, so the two systems meet at 6,894.76 pascals per psi.

Where you meet it: car and bike tyres. American gauges read in psi, while the pressure sticker inside the driver's door of many cars — and nearly every European and Asian owner's manual — quotes kilopascals. A typical car tyre at 32 psi is 32 × 6.89476 = 220.63 kPa; a road-bike tyre at 80 psi is 551.58 kPa. If your gauge and your sticker disagree in units, this page settles it in seconds.

Gauge, not absolute: tyre gauges read gauge pressure — pressure above the surrounding atmosphere — and so do the sticker figures. Do not add 14.7 psi (one atmosphere) unless you are deliberately working with absolute pressure, for example in a physics or engineering calculation. For tyres, compressors and inflation charts, gauge pressure is the number that counts.

Handy benchmarks: 20 psi = 137.90 kPa, 28 psi = 193.05 kPa, 32 psi = 220.63 kPa, 35 psi = 241.32 kPa and 40 psi = 275.79 kPa. If you need bar instead, see our psi to bar converter — 1 psi = 0.0689476 bar.

psi to kpa converter questions

What is 32 psi in kPa?
Multiply by 6.89476: 32 × 6.89476 = 220.63 kPa. That is the figure you will see on the door sticker of many cars whose recommended tyre pressure is 32 psi.
How do I convert psi to kPa?
Multiply the psi figure by 6.89476: kPa = psi × 6.89476. For example, 35 psi × 6.89476 = 241.32 kPa. To go back, divide kilopascals by 6.89476.
What psi should my car tyres be?
Follow the sticker inside the driver's door or the owner's manual, not the maximum printed on the tyre sidewall — that sidewall figure is a limit, not a recommendation. Most family cars sit between 30 and 35 psi (about 207–241 kPa); check pressures cold, before driving.
Is kPa the same as bar?
No, but they are close cousins: 1 bar = 100 kPa, so 220.63 kPa is 2.21 bar. Kilopascals are the SI unit; bar survives on European gauges and compressor dials. Our psi to bar converter covers that pair.
Why does my gauge read differently from the sticker?
Usually one of three things: the tyres were checked warm (driving raises pressure by 2–4 psi), the gauge is a cheap pencil type with a wide error, or one side is quoting absolute pressure. Check cold with a decent digital gauge and compare like with like.

More converters

Sources & official guidance

Exact pressure conversion — 1 psi = 6.89476 kPa. Tyre figures are gauge pressures; always follow your vehicle manufacturer's recommendation. See our disclaimer.